Contents
You don’t have to be a genius to figure out how to fix a sinking chair. All you need is a little know-how and the right tools.
Checkout this video:
Introduction
If your favorite chair is starting to sink, don’t despair! There are a few easy things you can do to fix the problem. In most cases, a sinking chair can be fixed with nothing more than a trip to the hardware store and a little elbow grease.
Here’s what you’ll need to do:
1. Identify the problem areas. Take a close look at your chair and identify any areas where the padding is sunken or the fabric is sagging. These are the areas you’ll need to focus on.
2. Measure the affected areas. Once you’ve identified the problem areas, measure them so you know how much material you’ll need to fix them.
3. Cut strips of fabric or foam to fit the problem areas. You can use either foam or fabric to fix your sinking chair, but foam is generally easier to work with.
4. Attach the strips of fabric or foam to the underside of the chair using adhesive tape or glue. Be sure to firmly attach the strips so they don’t sag over time.
5. Let the adhesive dry completely before sitting in the chair again. This step is important; if you sit in the chair too soon, you risk damaging the repair job you just did!
Materials Needed
Before you can fix a sinking chair, you need to know what materials you need. For this repair, you will need:
-A drill
-Foam filler
-A furniture leveling kit
-Spray paint (optional)
With these materials on hand, you will be able to fix your sinking chair and have it looking like new in no time.
Step One: Check the Legs
The first step is to check the legs of the chair to see if they are warped or damaged in any way. If they are, then you will need to replace them. If they seem to be in good condition, then you can move on to the next step.
Step Two: Check the Chair Base
The next step is to check the base of the chair. If it is damaged, then you will need to replace it. If it seems to be in good condition, then you can move on to the next step.
Step Three: Adjust the Height of the Chair Legs
If the legs of the chair are not damaged, then you can try adjusting their height. This may help to fix a sinking chair. To do this, simply turn each leg clockwise or counterclockwise until it is at the desired height.
Step Four: Replace the Chair Base
If adjusting the height of the legs does not fix a sinking chair, then you will need to replace the base. You can buy a replacement base at most furniture stores or online.
Step Two: Check the Joints
If the chair is still unstable, it’s time to check the joints. Rocking chairs and recliners are particularly susceptible to this problem, since they have multiple moving parts. Start by inspecting the rocking chair runners or recliner mechanism for any looseness or damage. If you find any damaged parts, you’ll need to replace them.
If the chair is still rocking or reclining after tightening or replacing all of the joints, you may need to add additional support. For arocking chair, you can add support by attaching blocks of wood to the bottom of the runners. For a recliner, you can add support by attaching L-brackets to the frame of the chair.
Step Three: Check the Springs
If your chair has springs, check to see if they are connected to the frame. If they are not, reattach them with pliers or a screwdriver. If they are, check to see if they are bent. If they are, you can try to straighten them with pliers. If this does not work, you may need to replace the springs.
Step Four: Check the Cushions
If your chair has cushions, they may be the cause of the sinking. Over time, the stuffing in the cushions can break down, causing them to sink. You can try fluffing the cushions to see if that helps, but you may need to replace them if they are too far gone.
Step Five: Check the Frame
The next step is to check the frame of the chair. This is where most of the support for the chair comes from, and it’s important to make sure that it is not damaged in any way. Look for cracks or splits in the wood, and make sure that all of the screws are tight. If you find any damage, you will need to either repair it or replace the frame.
Conclusion
Fixing a sinking chair is a simple process that anyone can do. It just takes a little time and patience. With these tips, you’ll be able to fix your own sinking chair in no time.
